Cart
0

FDMGeo Loudspeakers

The "Geos" are edgy, literally 😎

We've combined the sugary sweetness of the FDM5 top-end with an accurate and punchy mid-section and bottom end. If you're into critical listening, or even mixing and mastering, the FDMGeos are for you!

The FDMGeos will party all night long and wake you up in the morning with a fine cup of Espresso.

FDMGeo Build by Joel Telling of 3DPN

Community FDMGeo Builds

No items found.

FDMGeo in Black ABS, Galaxy Black PETG, and Gray ASA

Built by:
Eric
Pratt
Social media:
@BeardedPrinter
FDMGeo in Copper
FDMGeo in Copper Build Process
FDMGeo in Copper
No items found.

FDMGeo in PETG-CF Copper Painted

Built by:
Iwan
Broodryk
Social media:
@depositionsound
Deposition Sound FDMGeo Prints
No items found.

FDMGeo in ProtoPasta Galactic Empire Purple Metallic PETG & Polymaker Black PETG

Built by:
Jeremy
Stephens
Social media:
Final Layer 3D
No items found.

FDMGeo in PETG-CF Blue

Built by:
Iwan
Broodryk
Social media:
American Flag
Our kits and crossovers are designed, tested, and assembled in the USA.

Crossover Design

FDMGeo Crossover
PCBs built by MTG Designs
Heavy gauge air core inductors, precision audio grade resistors, high purity metallized polypropylene capacitors, precisely machined and soldered PCB

Smooth 12dB, 2nd order filters placed at 2 kHz

Tuned to be slightly revealing and solidly balanced in the mids and lows

High Output Woofer

5" Woofer for FDMGeos
Coated paper cone
‍
Excellent power handling!

Smooth, accurate, and extended response down to 40-50 Hz‍

Soft Dome Tweeter

Tweeter
Compact neodymium motor
‍
Ferrofluid enhances power handling and reduces unwanted resonance
‍
Provides smooth and flat high frequency extension

Cabinet Design

FDMGeo Cabinet Design
Elliptical cabinet interior shape is employed to reduce standing waves

Unified design merges port, cabinet walls, and internal bracing

5º rearward tilt on the front baffle better aligns the acoustic center of the tweeter and the woofer

Technical Specifications

FDMGeo Frequency Response

FDMGeo Frequency Response

FDMGeo Impedance

FDMGeo Impedance
Note: Measurement mic placed 39 inches (1.0 m) away from front baffle, on axis with the tweeter, atop a 36 inch (0.9 m) speaker stand, in a small bedroom. Frequency response plot is truncated below 200 Hz as this range tends to be room-dependent.

Model

FDMGeo

Design

2-Way Bass Reflex

Woofer

5" Coated Paper Woofer

Tweeter

3/4" Soft Dome with Neodymium Motor and Ferrofluid Damping

Crossover Frequency

2 kHz

Frequency Response

50 Hz - 20 kHz (±3 dB)  

Box Tuning Frequency

45 Hz

Power Range

30-70 W

Nominal Impedance

8 Ω (min. 6.0 Ω)

Sensitivity

87 dB

Weight per Speaker

6.27 lbs

Dimensions (H x W x D)

9.00" x 7.00" x 11.5"